FDA Registered - zIVF-AIRe™ 100C
FDA 510(k) # KO41952 for Use in IVF Laboratories
"As technology has advanced, the necessity to filter air has become even more important"
zIVF-AIRe™ 100C
Air Filtration / Purification
Laboratory air purification systems are a must, because no matter how well you maintain your laboratory, your work area can be filled with air pollutants, dust particles, mold spores, dander, pollen, dust mites, cleaning chemicals, volatile organic compounds (VOCs), chemically active compounds (CACs), carbon monoxide, viruses, and bacteria. Add to these culprits the chemical irritants lurking about… in carpets from the front office, behind the walls, from off-gassing in plastic materials, in the cleansers and waxes used to keep your laboratories and work surfaces clean. All these have a direct influence on your results.
The Zandair's laboratory air purification systems holds the key to effective air filtration/purification of damaging volatile organic compounds. The Photo Catalytic Oxidation Chamber. Chemical compounds become highly reactive when exposed to a specific wavelength of ultraviolet light. The photocatalyst attracts pollutants and converts them into benign compounds such as water (H2O) and carbon dioxide (CO2).
The zIVF-AIRe™ 100C Air Filtration / Purification System significantly reduces volatile organic compounds, bacteria & viruses including: mold, fungus, cleaning chemicals, paint and over 50 other chemicals. That is why it is the ultimate in laboratory air purification systems.
STEP ONE:
zIVF-AIRe™ 100C
AIR FILTRATION / PURIFICATION SYSTEM
The FRONT POSITION Activated Carbon Filter with specially formulated gas adsorption media (including zeolite and potassium permanganate) adsorbs automobile exhaust fumes, organic hydrocarbons, formaldehyde from particle boards used in construction, paint, solvents, chlorine, cleaning chemicals, volatile organic compounds (VOCs), chemically active compounds (CACs) and other harmful agents.
The back position HOSPITAL GRADE HEPA FILTER individually tested by the supplier and certified to remove particles of 0.3µm with not less than 99.97% efficiency by an approved aerosol. Pollen,mold,fungal spores,dust mites,and bacteria are examples of micro particles.
Additional Links:
*Operational validation tested and verified by: Truesdale Laboratories, Inc., Southwest Research Institute, and Aire Limpio S.L